
中空玻璃打膠機的打膠環節和中空玻璃之間的關系
時間:2021-09-11 來源:http://m.wkrd.com.cn/ 發布人:昌盛機械
可能很多人會疑問,中空玻璃自動打膠機的打膠環節和中空玻璃有什么關系。接下來,小編就給大家一起來說一下中空玻璃自動打膠機的打膠環節和中空玻璃的關系。
Many people may wonder what is the relationship between the gluing link of the automatic gluing machine for insulating glass and insulating glass. Next, I'll tell you about the relationship between the gluing link of the automatic gluing machine for insulating glass and the insulating glass.
一塊合格的中空玻璃不僅在于規范的操作流程與完美的工藝技術,更需要能滿足中空玻璃性能的中空玻璃加工設備和與其相關的密封材料。不同的中空玻璃的密封差異可能讓中空玻璃呈現的工藝成品以及綜合性能不同。
A qualified insulating glass not only depends on the standard operation process and perfect process technology, but also needs the insulating glass processing equipment and its related sealing materials that can meet the performance of insulating glass. The sealing difference of different insulating glass may make the process finished products and comprehensive performance of insulating glass different.
中空玻璃的密封主要采用密封膠,起到中空玻璃的密封作用。中空玻璃的密封,除紫外線照射是測試中空玻璃密封膠是否含有影響視線的有機揮發物外,另外四項指標“密封性能、初始露點、高溫高濕、氣候循環”,都是檢測中空玻璃在各種環境下的密封性能的。中空玻璃的密封主要采用密封膠,起到中空玻璃的密封作用。
Sealant is mainly used for the sealing of insulating glass, which plays the sealing role of insulating glass. For the sealing of insulating glass, in addition to ultraviolet irradiation, which is used to test whether the insulating glass sealant contains organic volatiles that affect the line of sight, the other four indicators "sealing performance, initial dew point, high temperature and humidity, and climate cycle" are all used to test the sealing performance of insulating glass under various environments. Sealant is mainly used for the sealing of insulating glass, which plays the sealing role of insulating glass.
槽鋁式雙道密封中空玻璃一道密封用丁基膠,具有非常低的水蒸氣透過率;二道密封膠主要有聚硫膠和硅酮膠。間隔鋁框宜采用連續長管彎角式,接頭處應用丁基膠做密封處理;間隔鋁框如采用四角插接式,其各個接頭處亦應用丁基膠做密封處理,以此做成的中空玻璃,使用壽命不如前者。當中空玻璃二道密封膠采用硅酮膠時,不應采用四角插接式間隔鋁框的中空玻璃。
The aluminum channel double seal insulating glass is sealed with butyl rubber, which has a very low water vapor transmission rate; The secondary sealant mainly includes polysulfide adhesive and silicone adhesive. The interval aluminum frame should be of continuous long pipe angle type, and the joints should be sealed with butyl rubber; If the four corner plug-in type is adopted for the spacing aluminum frame, the joints shall also be sealed with butyl rubber. The service life of the insulating glass made by this method is not as long as that of the former. When silicone sealant is used for the second layer of insulating glass, the insulating glass with four corner plug-in spacer aluminum frame shall not be used.

單道密封中空玻璃是難以滿足中空玻璃的密封性能的。為彌補這些膠的密封性能的不足,通常采用水汽透過率非常低,但結構性差的聚異丁烯膠作為中空玻璃的一道密封膠,以阻止潮氣向中空玻璃內滲透,這就是傳統的大家熟悉的雙道密封中空玻璃的生產工藝。由于雙道密封中空玻璃所采用的二種密封膠各自性能上的缺陷,只能采用兩者結合的方式(即雙道密封式)才能滿足中空玻璃的密封性和結構性指標?,F在有一些新型中空玻璃密封膠:結構型熱熔丁基密封膠。
It is difficult to meet the sealing performance of insulating glass with single seal. In order to make up for the lack of sealing performance of these adhesives, polyisobutylene adhesive with very low water vapor permeability but poor structure is usually used as a sealant of insulating glass to prevent moisture from penetrating into the insulating glass, which is the traditional production process of double sealed insulating glass. Due to the defects in the performance of the two sealants used in the double sealed insulating glass, only the combination of the two sealants (i.e. double sealed type) can meet the sealing and structural indexes of the insulating glass. There are some new sealant for insulating glass: structural hot melt butyl sealant.
中空玻璃打膠機主要用于中空玻璃的打膠環節,也就是我們平時所說的密封環節。中空玻璃打膠機主要針對中空玻璃的一道密封。使用專用設備將熱熔丁基膠加熱熔化后,用中空玻璃打膠機將丁基膠涂至中空玻璃的涂膠部位。這個打膠速度要掌握好,因為丁基膠幾分鐘就冷卻定型,打膠速度
The insulating glass gluing machine is mainly used for gluing of insulating glass, which is what we usually call sealing. The insulating glass gluing machine is mainly used for sealing the insulating glass. After the hot-melt butyl rubber is heated and melted by special equipment, the butyl rubber is applied to the gluing part of the insulating glass with the insulating glass gluing machine. The gluing speed should be well controlled, because the butyl glue will be cooled and set in a few minutes, and the gluing speed
以上就是為大家介紹的有關玻璃涂布機設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度
The above is the detailed introduction of the glass coater equipment. I hope it will help you. If you have any questions, please contact us.
上一篇:
下一篇:中空玻璃打膠機的使用技巧
相關新聞 moer+
- 封膠線生產玻璃的流程是什么 2025/02/28
- 中空玻璃生產線:用科技與創新,重新定義玻璃深加工 2025/02/22
- 全自動鋁條折彎機:智能制造時代的精密加工利器 2025/02/20
- 中空玻璃全自動封膠線的應用范圍有哪些 2025/02/17
- 中空玻璃全自動封膠線有哪些優勢 2025/02/15
- 雙組份打膠機:工業生產的高效密封利器 2025/02/13
- 中空玻璃加工設備選型要點 2025/02/10
- 中空玻璃加工設備:分類與功能 2025/02/06
- 探秘全自動封膠線:高效生產的幕后英雄 2025/02/02
- 解鎖中空玻璃加工設備:開啟建筑節能新時代 2025/01/30