Hollow glass is a new type of building material made by sealing air or other gases sandwiched between two pieces of glass. Hollow glass has advantages such as insulation, sound insulation, and anti condensation, making it widely used in modern architecture. The production line of insulating glass is composed of multiple processes. Below, we will introduce the process flow of the insulating glass production line.

，將玻璃切割成所需的尺寸。然后將兩片玻璃分別清洗干凈，確保表面光潔無塵，以便后續工藝制作。接著，將兩片玻璃放置在中空玻璃生產線的壓力板上，將兩片玻璃之間的間隙調整至所需的大小。

Firstly, cut the glass into the required dimensions. Then clean the two pieces of glass separately to ensure a smooth and dust-free surface for subsequent production processes. Next, place the two pieces of glass on the pressure plate of the insulating glass production line and adjust the gap between the two pieces of glass to the desired size.

在調整好間隙后，需要將兩片玻璃之間的間隙注入夾層氣體。這是中空玻璃生產線中的一個重要環節，夾層氣體的選擇會影響中空玻璃的保溫、隔音等性能。通常情況下，夾層氣體有空氣、干燥氬氣、干燥氮氣等。將夾層氣體注入后，需要進行密封處理，以確保中空玻璃的氣密性。

After adjusting the gap, it is necessary to inject interlayer gas into the gap between the two pieces of glass. This is an important link in the production line of insulating glass, and the selection of interlayer gas will affect the insulation, sound insulation, and other performance of insulating glass. Usually, the interlayer gas includes air, dry argon, dry nitrogen, etc. After injecting the interlayer gas, sealing treatment is required to ensure the airtightness of the insulating glass.

接下來，將已經密封好的中空玻璃送入加熱爐中進行加熱處理。加熱的溫度和時間取決于夾層氣體的種類和厚度，通常在150-300℃之間。加熱的目的是將夾層氣體中的水分蒸發掉，同時確保中空玻璃的平整度和穩定性。

Next, send the sealed insulating glass into the heating furnace for heating treatment. The temperature and time of heating depend on the type and thickness of the interlayer gas, usually between 150 and 300 ℃. The purpose of heating is to evaporate the moisture in the interlayer gas while ensuring the flatness and stability of the insulating glass.

后，將加熱好的中空玻璃送入冷卻區域進行冷卻處理。冷卻的目的是使中空玻璃表面溫度均勻，避免出現玻璃變形或開裂等問題。在冷卻完畢后，中空玻璃就可以進行包裝和出貨了。

Afterwards, the heated insulating glass is sent to the cooling area for cooling treatment. The purpose of cooling is to make the surface temperature of the insulating glass uniform and avoid problems such as glass deformation or cracking. After cooling, the insulating glass can be packaged and shipped.

總之，中空玻璃生產線是一個復雜的工藝流程，需要經過多個工序的處理才能生產出高質量的中空玻璃。隨著建筑行業的不斷發展，中空玻璃的應用也越來越廣泛，對于中空玻璃生產線的技術創新和質量管理也提出了更高的要求。

In short, the insulating glass production line is a complex process that requires multiple processes to produce high-quality insulating glass. With the continuous development of the construction industry, the application of insulating glass has become increasingly widespread, and higher requirements have been put forward for technological innovation and quality management of insulating glass production lines.

感謝您的閱讀，本文的精彩內容來自:中空玻璃生產線我們會有更多的精彩內容繼續為您呈現，詳情請點擊：http://m.wkrd.com.cn

Thank you for reading. The exciting content of this article comes from the insulating glass production line. We will continue to present more exciting content to you. For more details, please click: http://m.wkrd.com.cn