<p id="h9hjj"><mark id="h9hjj"><meter id="h9hjj"></meter></mark></p>
    <address id="h9hjj"></address>
    <form id="h9hjj"></form>

    <address id="h9hjj"><listing id="h9hjj"></listing></address>

    <form id="h9hjj"></form>
    <form id="h9hjj"></form>

            雙組份打膠機發生報警的響聲是怎么回事?

            時間:2020-09-18 來源:http://m.wkrd.com.cn/ 發布人:昌盛機械

            雙組份打膠機在使用過程中也會出現一些非常簡單的問題,比如報警是怎么回事?往往很簡單是事情,讓不明白的您措手不及,下面我們給大家講一下出現的原因以及解決辦法,讓您萬一出現問題的時候能以及的檢修,開始工作。
            There are some very simple problems in the use of the two-component gluing machine, such as what is the alarm? Often very simple things, let you do not understand by surprise, we will tell you the causes and solutions, so that you can repair and start work in case of problems.
            第一種情況:就應該是管路堵了,膠壓力超高報警,看看膠壓力有沒有超高,超高的話清洗管路。
            The first situation: it should be the pipeline is blocked and the glue pressure is too high to alarm. If the glue pressure is too high, clean the pipeline.

             


            第二種情況 雙組份打膠機看看是不是伺服電機報警,看看配電柜里的伺服控制器有沒有報警的。
            In the second case, the two-component gluing machine is to see whether the servo motor alarms, and whether the servo controller in the power distribution cabinet has an alarm.
            雙組份打膠機故障分析:
            Failure analysis of two-component gluing machine:
            1機頭前進定位螺栓松動。解決方法:調節好并固定好。
            1 head forward positioning bolt loose. Solution: adjust and fix.
            2 玻璃定位松動,使其失去作用。解決方法:調定好定位。
            2. The glass positioning is loose, making it ineffective. Solution: adjust the positioning.
            3 活動量太大或吸盤的真空發生器損壞。解決方法:維修。
            3. The activity is too large or the vacuum generator of suction cup is damaged. Solution: repair.
            4前移氣缸的前進力量太大。解決方法:調節前進速度。
            The forward force of the forward moving cylinder is too large. Solution: adjust the forward speed.
            如果您是購買的我們的產品,可以聯系我們的業務人員或者售后,我們給您提供電話解決和上門服務,讓您一次購買設備,終身無憂。
            If you are purchasing our products, you can contact our business personnel or after-sales service. We will provide you with telephone solution and on-site service, so that you can purchase the equipment at one time, without worry for life.

            聯系我們Contact us

            • 咨詢熱線:0531-85717458 13705446998
            • 公司地址: 山東省德州市齊河安頭鄉企巢工業園
            • 掃碼聯系我們:

            截屏,微信識別二維碼

            微信號:13705446998

            // 手机看片久久国产免费